This In-Line Fuse Holder is Designed to Turn One Slot Into Two
· Fuse Type: ATO / ATV Standard Blade Fuse
· Wire Length: about 12cm.
· Total length: about 16 cm
· MAX Installation Rating Up To 20Amps
· ACS base and ACS cover were welded via Ultrasonic wave.
1pcs 12cm Piggy Back fuse holder
1pcs wire plug
1pcs wire plug cover
1pcs ground wire connector
2pcs 10cm heat shrink tubes
5pcs Fuses: 3A, 5A, 10A, 15A, 20A (5A is good for the dashcam side)
1pcs Fuse Puller (Yellow Tweezers)