Cell Power CPUSB01 MiniUSB Battery Discharge Prevention (BDP) Hardwire Kit

More Views

Cell Power CPUSB01 MiniUSB Battery Discharge Prevention (BDP) Hardwire Kit
$34.95

Availability: In stock

Cell Power CPUSB01 MiniUSB Battery Discharge Prevention low voltage cut-off hardwire kit for Street Guardian SG9665GC dashcams, and any other dashcams supporting a MiniUSB power port.

Description

Details

Cell Power CPUSB01 MiniUSB 12V to 5V Power Adapter with BDP (Battery Discharge Prevention)

Low Voltage Cut-Off for Street Guardian SG9665GC (and other MiniUSB-powered) dashcam products

Tap into your car's fuse box for hardwired power.

We recommend you wire the Cell Power CPUSB01 module to a switched accessory fuse power circuit and it will turn on/off with the car's engine.

You can wire it to a non-switched battery fuse power circuit and it will supply continuous power until the Battery Discharge Prevention feature kicks in and shuts off the camera.
(We recommend you use the Vico-Power Plus for parking mode operations)
Note: you need to buy an add-a-fuse pig tail to connect this device.

Total Length = 13 feet / (4 meters)

miniUSB side = 8 feet / (2.5 meters)

fuse panel side wire = 5ft (1.5 meters) [red/black wires are 16 AWG]

Note: When you test, you need to start the engine, if you're only turning the key to ACC without the engine running it might be too low of a voltage for the CPUSB01 to start and provide power to the camera.

Additional Information

Additional Information

SKU CPUSB01
Manufacturer CELL POWER
EAN 704725657838
Specification No
Reviews No
PDF Url No

You may also be interested in the following product(s)

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.